Motherboards button
머더보드
Graphics Card button
그래픽카드
Mini PC button
미니 PC
Industrial PC button
산업 PC
Server/WS button
서버 / 워크 스테이션 시리즈
Taichi 시리즈 리뷰 이벤트
Taichi 시리즈 리뷰 이벤트
PG 시리즈 리뷰 이벤트
PG 시리즈 리뷰 이벤트
Steel Legend 시리즈 리뷰 이벤트
Steel Legend 시리즈 리뷰 이벤트
Pro 시리즈 리뷰 이벤트
Pro 시리즈 리뷰 이벤트
LiveMixer 시리즈 리뷰 이벤트
LiveMixer 리뷰 이벤트
ASRock Elite
ASRock Elite
PGRoom microsite
Phantom Gaming
Room
Loading

우리는 더 개인화되고 더 부드러운 경험을 제공하기 위해 쿠키를 사용합니다. 이 웹사이트를 방문하면 쿠키 사용에 동의하는 것 입니다. 쿠키를 허용하지 않거나 추가 정보가 필요한 경우 당사의 개인 정보 보호 정책을 방문하십시오.

자주하는 질문

  1. 고객지원
  2. 자주하는 질문
  3. CPU 지원 목록
  4. 제품 번호 확인 방법
  5. 시리얼 번호 확인 방법
  6. 찾기 BIOS 버전
  7. 인수 수리
  8. 기술 지원 문의하기
  9. Web 문제 전용 문의함
문제의 종류를 아는 경우, 다음 항목을 클릭하십시오.
자주 묻는 질문
Q (334): Dr.Debug는 무엇이며 이 코드들로 어떻게 트라블슈팅을 하나요?(2/1/2013)
Q (490): 시스템이 시작되지 않습니다. 디스플레이에 아무런 출력이 없습니다. 무엇을 해야 하나요?(7/1/2020)

결과:
Q (458): H81 Pro BTC(R2.0)에서 Windows 10 RS3 업그레이드 후에, 내 시스템에서 VGA 카드 드라이버가 에러 코드 "12"를 보입니다. 어떻게 해야 하나요?(12/1/2017)
Q (457): 온-보드 HDMI에서 WIndows Mixed Reality를 사용하고 싶습니다, 어떻게 해야 하나요?(12/1/2017)
Q (459): X299 플랫폼의 절전 모드로부터 시스템이 다시 시작된 이후 WiFi 기능이 동작하게 하려면 어떻게 해야 하나요?(12/1/2017)
Q (456): H81 Pro BTC로 채굴 시스템을 구축하고 싶습니다. PCIe 전원 커넥터를 PSU에 연결해야 합니까?(11/1/2017)
Q (455): Z270 Gaming-ITX/ac의 수신기를 통해 Dolby ATMOS를 어떻게 재생하나요?(10/1/2017)
Q (454): 채굴 시스템에 사용하기 위해 2개의 PSU를 가지고 있는 경우, H110 Pro BTC+에 PSU를 어떻게 연결해야 하나요?(10/1/2017)
Q (453): Thunderbolt AIC 카드는 어느 PCIe 슬롯에 사용해야 하나요?(10/1/2017)
Q (452): AM4 플랫폼에서 Ryzen Master와 A-Tuning을 동시에 사용할 수 있나요?(10/1/2017)
Q (451): X399 플랫폼에 CPU를 어떻게 설치해야 하나요? 1단계부터 3단계까지 참고해 나사를 조인 후, 커버가 잘 잠기지 않습니다..(10/1/2017)
Q (449): H110 Pro BTC+로 채굴 시스템을 구축하고 싶은데, 시스템에 얼마나 많은 전원이 필요합니까?(9/1/2017)
Q (448): 이 시스템이 그래픽 카드 중 하나를 인식할 수 없습니다. 무엇을 해야 하나요?(9/1/2017)
Q (447): TR4 1900X CPU를 X399 Taichi 또는 X399 Prof. gaming에 설치하고 싶은데, 무엇을 해야 하나요?
TR4 1900X CPU 지원을 위한 P1.30 BIOS 또는 최신 버전으로 다음의 단계를 참조해 업데이트 하세요.
(8/1/2017)
Q (445): PS2 포트에 PS2 마우스를 사용하고 싶은데, 어떻게 해야 하나요?(7/1/2017)
Q (444): S5 모드에서 USB 포트 전원을 끄려면 어떻게 해야하나요?(7/1/2017)
Q (446): 디스플레이 출력 없이, 그래픽 카드를 설치하려면 어떻게 해야하나요?(7/1/2017)
Q (440): AM4 시리즈 보드에서 USB 전원 켜기 기능에 사용하고 싶은데, 어떻게 설정하면 되나요?(6/1/2017)
Q (435): 인텔 옵테인 메모리 지원을 위해서 무엇이 필요합니까?(4/1/2017)
Q (432): 어떻게 Z270 Gaming-ITX/ac에서 Pioneer Ultra HD Blu-ray 드라이브를 통해 4K BD 영화를 재생합니까?(4/1/2017)
Q (434): 인텔 옵테인 메모리 기능을 지원하고 최적화 하기 위해 어떤 BIOS 버전으로 업데이트 해야하나요?(4/1/2017)
Q (436): 인텔 옵테인 메모리는 레거시 포맷의 시스템 드라이브를 지원 할 수 있나요?(4/1/2017)
Q (437): 인텔 옵테인 메모리 드라이버를 설치할 때, 다음 오류 메시지를 어떻게 해결하나요?(4/1/2017)
Q (438): Windows 10 RS1에서 Realtek Wireless LAN 드라이버를 설치할 때 Beebox Series 플랫폼에서 장치 관리자에 "!"가 표시되는 이유는 무엇입니까?(4/1/2017)
Q (439): AM4 시리즈 플랫폼에서 AMD Wraith RGB 쿨러 색상을 어떻게 바꾸나요?(4/1/2017)
Q (433): 어떻게 Z170 Gaming-ITX/ac에서 Pioneer Ultra HD Blu-ray 드라이브를 통해 4K BD 영화를 재생합니까?(4/1/2017)
Q (427): 팬 속도 제어를 지원하기 위해 AM4 마더 보드에서 어떤 팬 유형을 사용할 수 있습니까?(3/1/2017)
Q (420): DRAM XMP 프로파일을로드 한 후 시스템이 올바르게 부팅되지 않습니다. 어떻게해야합니까?(3/1/2017)
Q (421): AM4 메인 보드는 어떤 종류의 M.2 사양을 지원합니까? M.2는 SATA 포트와 공유됩니까? 어떤 SATA 포트?(3/1/2017)
Q (422): AM4 플랫폼에서 "CPU Frequency Multiplier Change"설정을 어떻게 조정할 수 있습니까?(3/1/2017)
Q (423): AM4 플랫폼에서 ASRock Instant Flash로 BIOS를 업데이트하려면 어떻게합니까?(3/1/2017)
Q (424): AM4 메인 보드에서 ASRock RGB LED를 어떻게 제어합니까?(3/1/2017)
Q (426): 만약 AM4 시리즈 머더보드의 바이오스 설정을 바꾼다면, 바이오스 업데이트 하기 전에 어떤 알아야 할 것이 있나요?(3/1/2017)
Q (431): If I want to change voltage in BIOS setting for Ryzen CPU on AB350 series motherboards, how do I do?(3/1/2017)
Q (443): AM4플랫폼 머더보드에 Windows7을 설치하려면 어떻게 해야 합니까?(3/1/2017)
Q (425): AM4 시리즈 마더 보드의 부팅 시간은 어떻게됩니까?(3/1/2017)
Q (429): BIOS 복구 및 보안 백업 UEFI 기능은 두 개의 BIOS ROM 칩이 있는 Intel Z270 머더보드에서 어떻게 작동합니까?(2/1/2017)
Q (430): AM4 모델에 메모리 모듈을 설치 하기 위한 우선 순위는 무엇입니까?(2/1/2017)
Q (419): DeskMini 에 USB 2.0전면 패널을 추가하고 싶은데, 어떻게 설치해야 하나요?(12/1/2016)
Q (418): 머더보드에 TPM 모듈이 있는데 BIOS 업데이트를 하려면, 어떻게 해야 하나요?(12/1/2016)
Q (417): Intel Braswell 플랫폼에서 두개의 USB 3.0 드라이브 사이에서 데이터를 전송하는 동안, 팝-업 오류 메시지가 나타나거나 데이터 전송이 성공적으로 되지 않을 때, 어떻게 고칠 수 있나요?(9/1/2016)
Q (416): ASRock M8 시스템에 대해 Windows 10에서 사용할 수 있는 A-Command 버전은 어떤 것 인가요?(9/1/2016)
Q (413): Z170 Extreme7+ 모델에서 mini-PCIe WiFi 카드를 설치하고 싶습니다. Mini-PCIe WiFi 카드와 WiFi 안테나를 연결하려면 어떻게 해야 합니까?(6/1/2016)
Q (415): 머더보드의 MAC 주소를 작성하는 방법은 무엇입니까?(6/1/2016)
Q (414): ASRock Intel X99 머더보드는 Intel Broadwell-E CPU를 지원합니까?(6/1/2016)
Q (412): Intel Skylake 플랫폼에서 VCLK를 102MHz 이상으로 설정하면 어떠한 일시적인 문제가 발생합니까?(4/1/2016)
Q (409): 윈도 10과 100시리즈 플랫폼에서 온 보드 VGA 드라이버를 설치하면, 시스템의 화면이 깜빡이며 "그래픽 드라이버가 응답을 중지하고 복구되었습니다” 가 표시됩니다. 해결 방법은 무엇입니까?(2/1/2016)
Q (410): Beebox에 mSATA 디스크를 설치하여 사용하고 있지만, WiFi 연결을 설정할 수 없습니다.(2/1/2016)
Q (408): 윈도 10의 종료 기능을 최대 절전(S4)에서 완전히 종료(S5)로 바꾸는 방법은 무엇입니까?(12/1/2015)
Q (407): Intel 100시리즈 플랫폼에서 PS/2 마우스를 PS/2 커넥터에 연결하였지만 작동하지 않습니다.(12/1/2015)
Q (406): Realtek 무선 LAN 카드가 장착되어 있는 Beebox에서 라우터의 2.4GHz 밴드에 연결할 수 없습니다.(12/1/2015)
Q (405): VMware에서 64bit 게스트 운영 체제를 사용하려고 하면, "이 호스트는 Intel VT-X를 지원하지만, Intel VT-X가 비활성화되어 있습니다"라는 팝업 메시지가 나타납니다.(12/1/2015)
Q (404): 윈도 10 버전 1511(Threshold 2 빌드 10586)에서, Z170 Extreme6와 Z170 Extreme6 그리고 Z170 Gaming K6 시리즈 모델이 절전 모드(S3)에서 깨어나지 못하거나 최대 절전 모드(S4)로 올바르게 진입하지 못합니다.(12/1/2015)
Q (403): AMD 760G 플랫폼용 Windows 10 VGA 드라이버를 웹사이트에서 찾을 수 없습니다. 어디에서 찾아서 설치할 수 있습니까?(11/1/2015)
Q (402): N3150/3050-NUC (OS가 포함된 Beebox)에 Windows 10 Home 64-bit를 다시 설치하고 활성화 하는 방법은 무엇입니까?(11/1/2015)
Q (401): Beebox에 두 개의 메모리 모듈을 듀얼 채널로 설치하려고 합니다. 어떤 메모리 모듈을 선택해야 합니까?(11/1/2015)
Q (400): 사용중인 DDR4-2133 DRAM 모듈이 Intel 100시리즈 머더보드에서 DDR4-1866 주파수로만 동작합니다. 이를 해결하는 방법은 무엇입니까?(9/1/2015)
Q (395): Beebox에서 사용할 수 있는 디스플레이 포트 동글은 무엇입니까? (8/1/2015)
Q (396): Windows 10에서 DTS Connect 5.1 서라운드가 동작합니까? (8/1/2015)
Q (399): 윈도우 10 환경에서 Killer LAN 드라이버를 1.1.52.1451 버전에서 1.1.54.1506 버전으로 업데이트 한 후, LAN 포트가 동작하지 않습니다. 어떻게 해야 합니까?(8/1/2015)
Q (398): Z170/H170/B150 게이밍 시리즈 머더보드용 ASRock 소프트웨어(XFast RAM, Fast Boot, Good Night LED, 제습기, 키 마스터, USB 키, OC DNA)는 어디에서 받을 수 있습니까?(8/1/2015)
Q (397): 소켓 2011/2011-3 머더보드에 CPU를 설치하는 방법은 무엇입니까? (8/1/2015)
Q (394): Intel G3258 CPU를 H81/P81/H87/B85/H91/H97 플랫폼에서 사용하고 있지만, Windows 10을 설치할 수 없습니다. 해결 방법은 무엇입니까?(7/1/2015)
Q (393): 사용하는 모니터와 DisplayPort 케이블이 DP1.2를 지원합니다. 하지만 AMD VGA 드라이버는 AMD FM2+ 플랫폼에서 여전히 "A display capable of DisplayPort v1.2 data rates and multi-streaming is currently connected to a connector that does not support DisplayPort v1.2" 라는 메시지만 출력합니다. 문제를 해결하는 방법은 무엇입니까?(6/1/2015)
Q (392): 사용중인 M8 시스템의 Wi-Fi 성능을 향상시킬 수 있는 방법은 무엇입니까?(6/1/2015)
Q (387): X99 플랫폼에서 두 개의 R9 295X VGA 카드를 설치한 후에, 시스템이 부팅되지 않습니다. 해결 방법은 무엇입니까?(3/1/2015)
Q (391): FM2A88X Extreme6+에 두 개의 모니터(DVI와 D-Sub)를 구성하는 경우, 시스템이 Windows 8.1을 부팅하는 과정에서 멈춥니다. 해결하는 방법은 무엇입니까?(3/1/2015)
Q (390): 사용하는 NVMe 스토리지에서 윈도우 7,8을 설치할 수 없습니다. 어떻게 해야 합니까?(3/1/2015)
Q (389): 사용 중인 시스템(AM1/FM2/FM2+)에서 CPU만 설치한 경우, 5회의 긴 신호음만이 울리고 부팅이 되지 않습니다. 해결 방법은 무엇입니까?(3/1/2015)
Q (388): 970 Performance에서 사용하고 있는 CPU가 최대 터보 클럭으로 동작하지 않습니다. 해결 방법은 무엇입니까?(3/1/2015)
Q (382): H87 Killer에서 Orbweb "Wake On Internet Technology"를 사용하려고 하였지만, 제 시스템은 원격으로 슬립 모드로 진입한 뒤 깨어나지 않습니다. 어떻게 해야 합니까?(12/1/2014)
Q (384): 3DMark가 실행되는 동안, 테스트 중에 시스템이 멈추거나 때때로 "프로세스가 예기치 않게 종료되었습니다."라는 오류 메시지가 나타납니다. 어떻게 해야 합니까?(12/1/2014)
Q (383): 인텔 9 시리즈 마더 보드에 빠른 스토리지 기술을 설치 할 수 없습니다. "The following application requires Microsoft .NET framework 4.5: Intel Rapid Storage Technology" 메시지가 표시됩니다. 어떻게 하면 드라이버를 설치 할 수 있습니까?(12/1/2014)
Q (378): 나는 ASRock 다운로드 존에서 베이트레일 모델용 모든 드라이버를 설치했습니다만, 여전히 장치관리자에서 "!" 가 있는 장치 하나가 보입니다. 어떻게 해야 하나요?(7/1/2014)
Q (377): 블루투스 장치들이 ASRock M8 시스템에서 제대로 인식되지 않습니다. 어떻게 이 문제를 해결하나요?(7/1/2014)
Q (376): ASRock 다운로드 존에서 인텔 9 시리즈 모델용 인텔 Management Engine 드라이버 버전 10.0.0.1204 를 다운로드 받았지만, 설치할 수 없습니다. 드라이버를 설치하려는 동안 "A required update is missing: Kernel-Mode Driver Framework 1.11 (KB2685811)" 라는 에러 메시지가 팝업 됩니다.(7/1/2014)
Q (375): KB2962409 윈도우 업데이트 설치 이후에, Fatal1ty 마우스 포트의 폴링 레이트가 125hz 이상 설정이 되지 않습니다.(7/1/2014)
Q (363): Fatal1ty 990FX Killer 에 M.2 SATA3 6.0 Gbps 모듈을 사용중인데, 성능을 높이기 위한 어떤 팁이 있나요?(5/1/2014)
Q (361): AMD 플랫폼에서 AMD 듀얼 그래픽 기능을 활성화 하는 방법은 무엇입니까?(3/1/2014)
Q (362): 제공된 CD 로부터 모든 드라이버를 설치한 후, 내 H61 시리즈 마더보드의 장치관리자에는 "IKBMON_01" 과 "IMSMON_01" 라는 2개의 알수없는 장치가 여전히 있습니다.
나는 어떤 드라이버를 설치해야 하나요?
(2/1/2014)
Q (360): 나는 990FX Extreme9 또는 Z77 Extreme 11 의 윈도우 8.1 을 위한 Intel 82583V LAN 드라이버를 찾을 수 없습니다. 어떻게 해야하나요?(1/1/2014)
Q (359): 에즈락 A-튜닝을 활성화 할 때, 아래 2개의 오류 메시지를 볼 수 있습니다:
Assertion failed: m_strCurrentPath.Length() > 0, file Module\OMG\Registry.cpp, line 372
어떻게 이 문제를 해결할 수 있을까요?
(12/1/2013)
Q (358): 내 DN2800MT 시스템은 윈도우7 부팅화면에서 LVDS 패널을 통해 왜곡된 화면을 가져옵니다. 어떻게 해야
하나요?(10/1/2013)
Q (357): 안드로이드 시스템을 통해 내 시스템을 제어할 수 있는 Sunlogin 앱을 사용할 때, 원격 데스크탑 제어시 오류
메시지가 있습니다. 이 문제를 어떻게 해결하나요?(10/1/2013)
Q (356): GPT 모드에서 윈도우 8.1 을 설치할 때, 오른쪽 하단구석에 "보안 부팅이 정확히 설정되지 않았다" 는 워터마크가 있습니다. 어떻게 이것을 해결할 수 있나요?(10/1/2013)
Q (354): 사용하고 있는 Wi-SD box에서 SD카드를 인식하지 못합니다. 올바르게 인식시키려면 어떻게 해야 합니까?(9/1/2013)
Q (351): 가지고 있는 eSATA 장치를 Z87풀랫폼에 장착된 ASMedia SATA3 컨트롤러에서 인식하지 못합니다. 어떻게 해야 합니까?(9/1/2013)
Q (350): Windows 8 32/64bit에서 미디어 플레이어로 영화나 음악을 감상할 적에 전면 오디오 패널에 헤드폰을 연결 할 때마다 미디어 플레이어가 예기치 않게 멈추거나 에러메시지가 나타납니다. 어떻게 해야 합니까?(9/1/2013)
Q (353): Wi-SD box에 4핀 전원 케이블을 연결 하면, 시스템이 종료되지 않습니다. 어떻게 해야 합니까?(9/1/2013)
Q (355): GPT 형식으로 포맷된 드라이브에 Windows 7 64bit OS를 설치한 후 Z87 OC Formula의 모든 드라이버를 설치하면, 시스템을 종료 할 수 없습니다. 어떻게 해야 합니까?(9/1/2013)
Q (352): 지원 CD에서 E3-1265L v3 CPU의 통합그래픽 VGA 드라이버를 설치 할 수 없습니다. E3-1265L v3 CPU에 맞는 VGA 드라이버는 무엇입니까?(9/1/2013)
Q (349): 사용하는 Z87 마더보드에 두 개의 Intel 온보드LAN이 있습니다. 온보드 LAN으로 티밍(Teaming)기능을 사용하기 위한 설정을 하는 방법은 무엇입니까?(7/1/2013)
Q (348): Internet Flash기능으로 BIOS 업데이트를 사용할 수 없습니다. 어떻게 해야 합니까?(7/1/2013)
Q (347): AMD A85X/A75/A55 시리즈 플랫폼에서 AMD 듀얼 그래픽 기술을 사용하기 위한 조건은 무엇입니까?(7/1/2013)
Q (346): ATX와 micro-ATX 보드를 혼용할 수 있는 샤시에서, micro-ATX 마더보드에 필요한 고정 나사는 무엇입니까?(7/1/2013)
Q (345): Vision 3D 의Ubuntu (Kernal version 3.2.0-23) 에서 Wake On LAN기능을 사요하려면 어떻게 해야 합니까?(4/1/2013)
Q (343): FM2 마더보드에서 내장 VGA를 비활성화 하는 방법은 무엇입니까?(4/1/2013)
Q (342): Lucid Virtu MVP를 업데이트 하고 싶습니다만, Lucid 공식 홈페이지에선 Virtu MVP 와 Virtu MVP R2.0의 두 가지 버전이 있습니다. 어느 버전의 Virtu MVP를 업데이트 하여야 합니까?(3/1/2013)
Q (341): XFast USB를 Windows 8에서 사용하고 있습니다만, ASMedia USB3.0 포트를 이용해서 파일을 복사 할 수 없습니다. 이 문제를 해결하기 위해선 어떻게 해야 하나요?(3/1/2013)
Q (340): Socket 115x 마더보드에 CPU를 장착하려면 어떻게 해야 합니까?(3/1/2013)
Q (339): ASMedia SATA3드라이버를 설치 시 계속 블루스크린만 나타납니다. 윈도우8에서 어떻게 설치하나요?(2/1/2013)
Q (334): Dr.Debug는 무엇이며 이 코드들로 어떻게 트라블슈팅을 하나요?(2/1/2013)
Q (335): DVI 포트도 HDMI 같이 오디오 시그널을 전송할 수 있나요? 어떻게 HDMI 모니터와 연결을 하나요?(2/1/2013)
Q (338): VirtuMVP V2.1.221 유틸리티를 설치한 후 프린터 사용이 안됩니다. 무엇이 문제인가요?(2/1/2013)
Q (336): FastBoot 기능이 듀얼 운영체제 시스템에도 사용이 가능하나요?(2/1/2013)
Q (337): 윈도우7 OS에 VisionX 에서 포토뷰어를 사용하면 시스템이 멈춥니다. 무엇이 문제인가요?(2/1/2013)
Q (333): 윈도우XP를 설치할 때, 왜 제 시스템은 하드디스크를 검색하지 못할까요(1/1/2013)
Q (332): 인텔7 칩셋 시리즈 또는 AMD FM 칩셋 시리즈 마더보드에 윈도우7 혹은 윈도우8을 GPT모드로 사용중인시스템입니다. 이 경우 별도의 VGA카드 드라이버를 설치하면 블루스크린이 뜹니다. 어떻게 해야 하나요?(1/1/2013)
Q (331): RAID 0 볼륨을 만들었고 이 볼륨에 운영체제를 설치하고 싶습니다. 얼마만큼의 사이즈로 섹터를 잡아야운영체제를 설치할 수 있습니까?(1/1/2013)
Q (330): 인텔 6칩셋 시리즈 마더보드에 인텔 아이비브릿지 CPU를 사용 중이며 바이오스 업데이트 후 계속블루스크린만 뜨고 더 이상 윈도우8으로 부팅이 안됩니다. 어떻게 해야 하나요?(1/1/2013)
Q (329): 애즈락 웹사이트에서 다운 받은 VGA 드라이버를 설치 시 계속적인 에러 메시지를 출력합니다. 어떻게 하면VisionX 시리즈에 올바르게 설치할 수 있을까요?(12/1/2012)
Q (328): 윈도우7에서는 Intel INF버전을 9.3.0.1025 으로 업데이트 해야하나요?(12/1/2012)
Q (327): GTX690 그래픽 카드 사용 시, 최대 3D 성능으로 듀얼 모니터를 어떻게 구성하나요? (11/1/2012)
Q (326): 레이드 기능을 사용 시, 트림 기능을 사용하고 싶습니다. 어떤 시스템이 레이드 0 트림 기능을 지원하나요?(11/1/2012)
Q (325): VisionX에 윈도우8을 설치했습니다. 슬립모드에서 나와 재구동 시, 블루투스 디바이스가 사용이 불가능한데요?(11/1/2012)
Q (323): 제 마더보드가 윈도우8을 지원하나요?(10/1/2012)
Q (322): 윈도우8에서 어떻게 Hibernate (S4)의 셧다운 기능을 shut down (S5)으로 바꿀수 있나요?(10/1/2012)
Q (324): Z77, Z68, B75, H67 시리즈 마더보드의 온보드 VGA를 어떻게 128비트 버스 구성 설정하나요?(10/1/2012)
Q (321): 어떤 미니-PCIE 디바이스를 Z77 Extreme6는 지원을 하나요?(10/1/2012)
Q (320): N68 시리즈 마더보드에 3TB의 HDD를 연결하였습니다. 하지만 윈도우7 설치 시 HDD는 768GB로 표시 됩니다.(8/1/2012)
Q (319): 애즈락 X79 프랫폼에서 LSI MegaRaid 9240-8i RAID ROM에 접근이 안됩니다. 어떻게 해야하나요?(8/1/2012)
Q (318): 아이비 브릿지 CPU를 사용하기 위해 바이오스를 업데이트 한 후, 장치관리자에 "INT33A0"이라는 알려지지 않은 장치가 생겼습니다 어떻게 해야하나요?
(8/1/2012)
Q (317): 시스템에서 VGA를 인식을 못하고 Dr.Debug에 d6가 출력됩니다.(6/1/2012)
Q (316): 애즈락 970/990FX 마더보드에서 2.2TB 가 넘는 RAID 볼륨에 OS를 어떻게 설치하나요?(5/1/2012)
Q (315): H67M 마더보드에 SATA3 HDD와 ODD를 연결하면, 윈도우 XP로 로그인 하는 시간이 좀 늘어납니다.어떻게 하나요?(5/1/2012)
Q (314): SATA를 RAID 혹은 AHCI 모드로 설정하였을 때, AIAX64 이나 CrystalDiskInfo 와 같은 유틸의 S.M.A.R.T 정보들을 확인할 수 없습니다. 왜 그런가요?(5/1/2012)
Q (313): 일본어판 윈도우7에서 AXTU 설치를 완료할 수 없습니다? 어떻게 하나요?(5/1/2012)
Q (312): 인텔 스마트 리스폰스 기술을 사용하기 위한 기본 사양이 어떻게 되나요?(5/1/2012)
Q (311): Vision3D에서 블루레이 디스크를 플레이 하면, 오류 메시지와 함께 플레이가 되지 않습니다?(4/1/2012)
Q (310): 윈도우 7으로 add-on VGA로 사용 시, Cyberlink MediaEspresso 6.5를 실행하게 되면 시스템이 멈춥니다. 어떻게 하나요?(4/1/2012)
Q (309): AMD 880G, 890GX 칩셋 시리즈 마더보드에서 어떻게 듀얼-링크 DVI를 활성화 시키나요?(3/1/2012)
Q (308): 윈도우XP에서 XFast USB 기능을 사용 시, 파일 복사가 원활히 이루어지지 않습니다. 어떻게 하나요?(3/1/2012)
Q (307): PV530, PV530-ITX, PV530A or PV530A-ITX 에서 인터넷 익스플로러9으로 업데이트 한 후, IE가 정상적으로
동작하지 않습니다. 어떻게 해결하면 되나요?(3/1/2012)
Q (306): 제 애즈락 6시리즈 마더보드가 인텔 아이비 브릿지 CPU를 지원하나요?(2/1/2012)
Q (305): 애즈락 XFast 랜의 티밍 구성은 어떻게 하나요?(1/1/2012)
Q (304): Vision 3D(샌디브릿지) 시리즈에선 Ubuntu11.10을 어떻게 설치하나요?(1/1/2012)
Q (303): AM3R2 CPU에 윈도우7을 사용 중인데 "XP모드"로 어떻게 설치하나요?(1/1/2012)
Q (301): How do I setup full space of memory with RAM disk tool on Intel platform?(12/1/2011)
Q (300): I want to use OCZ RevoDrive PCI-E SSD add-on card on X58 platform, what should I setup in BIOS?(12/1/2011)
Q (302): After I shut down the system, my USB keyboard and mouse are still light on. How could I turn them off?(12/1/2011)
Q (298): If my mouse or keyboard works abnormally under BIOS, how do I solve this problem?(11/1/2011)
Q (297): How do I setup digital sound (DTS5.1, Dolby5.1, DTS HD Master and Dolby True HD) output via HDMI or SPDIF?(11/1/2011)
Q (296): How could I enable 3D feature on ASRock Vision 3D and ION3D system?(11/1/2011)
Q (299): How do I pre-install the SATA RAID driver on X79 chipset motherboard?(11/1/2011)
Q (295): Etron USB3.0 ports could not detect my USB3.0 devices with JMicron IC, what should I do?(9/1/2011)
Q (291): When I install ATI HD6670, HD6570, and HD6450 on A75/A55 series motherboards, there is no display output from VGA card. What can I do?(9/1/2011)
Q (292): I would like to use WD SmartWare software for system backup, but when ASRock Xfast USB is enabled, WD Smartware does not work. What can I do?(9/1/2011)
Q (294): How could I enabled "Data Execution Protection (DEP)" supported from CPU?(9/1/2011)
Q (293): I would like to test the VT-d feature. Do you have an SOP for it?(9/1/2011)
Q (290): I would like to update the VGA driver of Vision 3D from NVIDIA official website, what should I do?(6/1/2011)
Q (289): I install Microsoft Windows OS in GPT mode and Ubuntu in MBR mode with two different HDD, and I cannot boot into Microsoft Windows OS, how to solve that?(6/1/2011)
Q (288): When using Windows MCE, the system sometimes wake up automatically. How do I solve this problem?(6/1/2011)
Q (285): I have installed all the drivers from support CD, but I could not enable the Intel Smart Response Technology on my Z68 motherboard. What should I do?(5/1/2011)
Q (283): I am an owner of AD425PV3/AD525PV3. I could not get any display after booting up my system; I could see CPU fan and power fan are spinning but no display, what should I do?(4/1/2011)
Q (287): If I play Blu-ray 3D movie and use DTS-HD 7.1 formats to output by PowerDVD 10 on Mini PC 3D series, the sound may be lag. How do I solve this problem?(4/1/2011)
Q (286): What's the meaning of AMI UEFI BIOS Beep code?(4/1/2011)
Q (284): Why can't I play Blu-ray discs with Core100HT-BD under Windows XP?(4/1/2011)
Q (279): I would like to install Windows® 7 x64 with GPT format HDD, is there anything I should have done before doing so?(3/14/2011)
Q (280): After installing Daemon Tool, why can't my system play Blu-Ray movie via PowerDVD10?(3/14/2011)
Q (282): Why can't my iPhone4 be recognized by Etron USB3.0 controller?(3/14/2011)
Q (281): If using Directory Opus, how do I improve the performance of network transfer speed?(3/14/2011)
Q (277): After installing an optional Windows update "Accusys Inc – Storage- ACS-6xxxx" on X58 Extreme6, P67 Professional, P67 Extreme6 or P67 Extreme4, some onboard devices cannot work normally. How do I solve this problem?(1/14/2011)
Q (276): I connect Vision 3D with TV via HDMI cable, but cannot hear any audio playback after system resume from suspends. What do I do?(1/14/2011)
Q (275): How do I connect the CIR receiver which bundle with H67M-GE/HT?(1/14/2011)
Q (274): 내 마더보드의 PCIE 자물쇠를 어떻게 사용하나요?(12/30/2010)
Q (273): 왜 매번 윈도우7 64비트상에서 시스템을 부팅할때마다 MarvellTray.exe 대화상자가 나타나는건가요?(12/30/2010)
Q (272): ION 330 시리즈는 절전 또는 최대 절전 모드에서 복귀할 때, 오디오 장치가 더 이상 동작하지 않습니다. 어떻게 이 문제를 해결할 수 있나요?(12/30/2010)
Q (271): 왜 내가 설치한 메모리 크기가 P55, H55, X58, P67 그리고 H67 시리즈 마더보드들의 포스팅 화면에서 더 작게 나타나나요?(12/30/2010)
Q (270): 내 3D TV 에서 non 3D DVD 또는 블루레이를 재생시킬 때 원할하지 않습니다. 어떻게 이 문제를 해결 할 수 있을까요?(12/30/2010)
Q (269): How to play AVATAR Blue-Ray Disk with Power DVD Ultra on ION330 series system ?(7/15/2010)
Q (268): Where could I get the maximum share memory on H55 series motherboards?(7/15/2010)
Q (267): How to create more air flow on P55 and H55 series motherboards?(5/6/2010)
Q (264): Could I connect USB2.0 cable to USB3.0 external HDD device and USB3.0 external HDD device run at SuperSpeed mode?(5/6/2010)
Q (266): I adopt Samsung HD323HJ / HD502HJ / HD503HI / HD103SJ / HD105SI HDD to AMD® SB850 chipset motherboard, but when I start system, the HDD did not spin up. How should I do?(5/6/2010)
Q (265): I have a WD Advanced Format HDD (Western Digital) in my system. The system freezes, Windows® installation cannot find the HDD, or I have low transfer speeds. How can I solve it?(5/6/2010)
Q (263): If I use AC'97 front audio panel with VIA® audio codec motherboard, how do I connect AC'97 front panel to HD Audio header on the motherboard?(2/10/2010)
Q (262): I connect my IR receiver to onboard IR header , how can I make it work under Windows® 7?(11/21/2009)
Q (261): After installing windows7 on ALiveNF7G-GLan or N68PV-GS I installed all the windows7 driver from the website, why I still get an exclamation mark on "co-processor" in device manager?(11/21/2009)
Q (260): Can I use water cooling as my CPU fan?(11/21/2009)
Q (259): Does my motherboard support Windows® 7?(11/21/2009)
Q (258): Is there any possibility to disable the LED of ION 330 ?(10/22/2009)
Q (257): Why my P55 chipset motherboard cannot boot up, the Dr. Debug LED display shows error code "E8".(10/22/2009)
Q (254): ION330 support Dolby Digital 5.1 or DTS 5.1?(9/3/2009)
Q (256): I have plug two NVIDIA® VGA cards on my motherboard but, I cannot find the Enable SLI option in NVIDIA® Control panel?(9/3/2009)
Q (255): Why I cannot hear audio playback under Windows® XP when I connect HDMI cable with ION330?(9/3/2009)
Q (251): With ION330, Under Windows® XP, I can not wake up system from S3 and S4 by USB keyboard mouse, why?(8/11/2009)
Q (252): If I use HDMI output, the desktop size can not fully fit the monitor.
How can I do?(8/11/2009)
Q (253): After I selected EZ OC to higher frequency option in ION330. There will be no post image or get black screen. How can I do?(8/11/2009)
Q (250): I can not virtual 64bit OS, when I adopt AMD® CPU with Sun's xVM virtual Box software. How can I do?(6/25/2009)
Q (249): I installed Vista x64 sp1 on ALiveNF6G-GLAN, but I cannot shut down my system after I execute the "sysprep" program under operating system. What do I do?(6/25/2009)
Q (248): When I plug in an eSATA HDD, it can be recognized in the BIOS. But in the OS, it will show a massage "Storage Device Connected". And I can not use this eSATA HDD, ether. How can I fix it?
(3/28/2009)
Q (247): I want to install Linux CentOS 5.2 on X58 SuperComputer. After start the installation of CentOS 5.2, the system stays on checking hardware device. I cannot continue the Linux installation, what can I do?(3/28/2009)
Q (246): When I use Vista 64bit SP1 OS, the [Event viewer] in the OS shows
Kernel-Proessor-Power error, but the OS works fine. How can I solve this error in the [Event viewer]?(2/27/2009)
Q (245): I install ATI 2xxx, 3xxx, 4xxx series PCIE VGA card on the motherboard. After installing all Windows® XP drivers from the motherboard, it still shows an unknown "audio device on the high definition audio bus." message under device manager. What could I try?(1/12/2009)
Q (244): When I create a RAID volume over 2TB capacity, the RAID volume cannot be recognized after installing the RAID driver during XP installation. Why?(1/12/2009)
Q (243): I use a Samsung SATA optical device (SH-203) on ALiveNF6P-VSTA. How do I get the system to work under Windows® XP properly?(11/27/2008)
Q (242): When I connect a HDMI_SPDIF cable from the HDMI VGA card (GTX260 or GF9800) to the onboard HDMI_SPDIF header, it cannot get sound from the HDMI output. What should I do?(11/27/2008)
Q (241): I have a motherboard with Realtek HD Audio Codec. When I use Windows® XP SP3 or upgrade to Windows® XP SP3, the onboard audio doesn't work. What could I try?(11/27/2008)
Q (240): How should I make my SATA HDD working with "Hot Plug" function properly on my ALiveNF6P-VSTA / ALiveNF6G-GLAN / NF6-GLAN motherboard?(10/23/2008)
Q (239): I want to use a Phenom CPU with NVIDIA® 7600 and 7800 series AGP VGA card on AM2NF3-VSTA or ALiveDual-eSATA2 under Windows® XP. Is there any point for attention?(10/23/2008)
Q (238): I am using Intel® chipset X48 / X38 / P45 / P43 / G43 / P35 / G31 / P965 series motherboard with 4GB memory modules installed. But it always detects the memory size as 3GB instead of 4GB at POST screen. What should I do?(10/23/2008)
Q (237): When I install a Terratec Cinergy C PCI TV card or Technisat Cablestar HD2 TV card on VIA® chipset based motherboards, such like 4CoreDual-SATA2 (PT880 series motherboards) or ALiveSATA2-GLAN, it always show "PCI IRQ routing table error" message after BIOS POST, or simply hang up during BIOS POST. Any way to fix the problem?(9/5/2008)
Q (236): I am a 939Dual-VSTA user. At first, my onboard audio works fine with integrated audio driver under Vista™. After updating to Vista service pack 1, my onboard audio does not work anymore. Can you help me?(9/5/2008)
Q (235): My P45 motherboard has two onboard LANs. How do I set the Teaming function and combine both onboard LANs to be a team with more bandwidth in my system?(9/5/2008)
Q (234): My motherboard is with NVIDIA® Geforce 7050/6150/6100 chipset. I use the VGA driver 175.19 from NVIDA website under Windows® XP SP1. After installing the driver, I get 640X480 4bit color under Windows® XP. But using the driver from your support CD, it has no problem.(7/31/2008)
Q (233): I use Intel® CPUs, why the Vcore sometimes is lower than the value in the BIOS?(7/31/2008)
Q (232): I install more than 2GB system memory on my system. When I run the "Sound Recorder" under Windows® XP, it always shows the following error message. What's wrong?
(7/31/2008)
Q (231): When installing NVIDIA GeForce 8400/8500 series PCIE VGA card on K10N78hSLI-WiFi / K10N78hSLI-1394 / K10N78hSLI-GLAN under Windows® XP/ XP 64-bit, I can not get full system memory. Besides, system shows two display adapters in the Device Manager. What can I do?
(6/26/2008)
Q (230): When I install Realtek HD Audio driver, I found the system shows below error message. What can I do?
(6/26/2008)
Q (227): How do I get my onboard LAN to work properly?(4/28/2008)
Q (229): When I use Adobe Acrobat Reader ver 7.08 to read PDF file under Vista SP1, it pops up an error message: This program has some compatibility issue… What do I do?(4/28/2008)
Q (228): My motherboard is ALiveNF6P-VSTA / ALiveNF6G-VSTA (MCP61 chipset). I'm encountering some problems with SATA HDD when installing the drivers of the motherboard under Windows® Vista™. What should I do?(4/28/2008)
Q (226): My motherboard with Realtek ALC662 audio codec supports 5.1 channel HD Audio. But it has 3 audio connectors (Light blue, Lime and Pink) on the rear audio panel. How do I connect my 5.1 channel speakers to the rear audio panel?(3/24/2008)
Q (225): When I install 4GB or more memory on Penryn1600SLi-110dB, I found it became unstable under Windows® Vista™ 64-bit. What should I do?(3/24/2008)
Q (224): I use the ASRock WiFi card as software AP. However there are some APs around my place; how do I change the channel of the software AP to avoid the interference?(2/14/2008)
Q (223): My motherboard is Wolfdale1333-D667 R1.0/R2.0. I want to install one more internal USB device, is there any way I can do?(2/14/2008)
Q (222): I'm using 4GB system memory with Windows® Vista™ 64bit and ATi VGA card on ALiveXfire-eSATA2, I'm not able to boot into or install Windows® Vista™ 64 bit. With 3GB or less system memory, it has no problem. Is there a solution for this problem?(2/14/2008)
Q (221): My motherboard is 4Core1600Twins-P35/4Core1600P35-WiFi(+). I want to overclock my FSB 800 CPU. Are there any tips to increase the overclocking capability of my system?(1/14/2008)
Q (220): When using SATA Optical drive under Windows® 2000, I found the transfer speed of my SATA Optical drive is abnormal. Can you help?(1/14/2008)
Q (219): I can not access my SATA ODD drives (such like: LG BD/HD Player GGC-H20L, Pioneer BDC-SB20K, Pioneer DVR-212BK…) on ALiveNF7G-HDReady under Vista™. What can I do?(1/14/2008)
Q (218): When I install AMD® Phenom CPU on ALiveNF6G-VSTA, I found Windows® Vista™ shows yellow " ! " mark on PCI Express standard Root Port in Device Manager. What do I solve it?(1/14/2008)
Q (217): My motherboard is 4Core1333-Viiv / 4Core1333-GLAN / 4Core1333-eSATA2. When I install INF driver from Motherboard Support CD, it will show below error message. Is there any way to fix this problem?
(12/19/2007)
Q (216): If I use a Phenom CPU on ALiveNF7G-HD720p, I am not able to change resolutions of onboard VGA over 1088x612(32bit color) under Windows® XP. How do I solve this?(12/19/2007)
Q (215): I'm using the AMD® AM2 Athlon 64X2 5000+ Black Edition CPU. The ratio of this CPU is unlocked. I would like to overclock it by adjusting the ratio. But after adjust the CPU ratio in BIOS and boot into the Windows, the ratio of this CPU does not change. What should I do?(12/19/2007)
Q (214): I use a NVIDIA® 8800GT PCIE VGA card on VIA® chipset motherboard. But I got black screen on the monitor. How do I solve it?(11/5/2007)
Q (213): I'm using NVIDIA® AGP card under Windows® Vista™ on my 775Dual-VSTA / 4CoreDual-VSTA / 4CoreDual-SATA2. When I rate the computer's performance, the screen suddenly becomes abnormal. Why?(11/5/2007)
Q (212): I'm using 4 GB system memory under Windows® XP Professional x64 Edition. Why can't I enable hibernation in the Power Option of Control Panel? It does not have hibernation tab in it!(11/5/2007)
Q (211): Does onboard VGA of ALiveNF7G-HDReady / ALiveNF7G-HD720p support resolution 1600x1200 through DVI output?(10/2/2007)
Q (210): I want to install Windows® Vista™ 32-bit / Vista™ 64-bit OS on AM2NF3-VSTA / ALiveDual-eSATA2. Is there any point for attention?(10/2/2007)
Q (208): I install Windows® Vista™/Vista™ 64bit on 4Core1333-FullHD / ALiveXFire-eSATA2 with AHCI/RAID mode. After installing the ATI Catalyst VGA driver which downloads from ATI website, the system will become abnormal while resume from Sleep or Hibernate. Is there any way to fix the problem?(9/10/2007)
Q (207): After installing ATI HDMI audio driver for my ATI HD 2xxx series PCIE card, I found the onboard sound will not work. How do I fix the problem?(9/10/2007)
Q (206): I am using a 4 / 6 / 7.1 channels speaker on AM2NF3-VSTA. Why do only 2 channels work under Windows® Vista™?(8/3/2007)
Q (205): I am using the onboard VGA of A780FullDisplayPort or ATi Radeon HD 2xxx/3xxx series PCIE card. Every time I run the 3DMARK or PCMARK, it always freezes during the splash-screen. It does not work at all. How do I fix it?(8/3/2007)
Q (204): My system is based on P4VM890 / P4VM890 R2.0 with the Integrated VIA® UniChrome Pro 3D/2D Graphics. When I zoom-in in Google Earth, the picture will get abnormal display (See the following picture). What should I do?
Abnormal display: (black blocks)
(8/3/2007)
Q (203): I use an external USB HDD on ALiveNF7G-HD720P/ALiveNF7G-HDready. I feel that the speed of USB is slower. Is there any method to improve it?(6/25/2007)
Q (202): ALiveNF7G-HD720P/ALiveNF7G-HDready support HDMI output?(6/25/2007)
Q (201): My motherboard is ConRoe1333-DVI/H R2.0. Are there recommended memory configurations for my motherboard?(4/25/2007)
Q (200): I have a motherboard with Realtek HD audio codec. After resume Windows® Vista™ from sleep or from hibernation, the high definition audio device may no longer work. How do I solve this?(4/25/2007)
Q (199): I'm using Windows® Vista™. I just installed a new VGA card, but the screen gets abnormal display. Is there anything I should do?(4/20/2007)
Q (198): I have a motherboard with Realtek HD audio codec. After installing the Microsoft® Security Update 925902 and 928843, my system shows the following error message. How do I fix this?
(4/20/2007)
Q (196): My onboard audio is Realtek HD audio. In the Windows® Vista™, I can't use Sound Recorder to record the audio. What should I do?(3/19/2007)
Q (197): If the MIDI/GAME port is enabled in the BIOS setup, the device manager will show yellow "!" under Windows® Vista™. Why?(3/19/2007)
Q (195): I am using the ConRoeXFire-eSATA2/ 775XFire-eSATA2+/ 775XFire-eSATA2/ 775XFire-VSTA/ 775XFire-RAID motherboard. My Operating system was installed in a SATA/ SATA2 HDD with "IDE" mode. When I install the SATA2 driver (Intel® Matrix Storage Manager), system always pops an error message "This computer does not meet the minimum requirements for installing this software". Why?
IDE mode (In BIOS setup):

SATA2 driver:

Error Message:
(2/15/2007)
Q (194): How do I enable Windows® Aero feature in my Windows® Vista™ Premium system?(2/15/2007)
Q (191): When my computer is in standby mode, I can not resume from USB devices. Can you help?(1/16/2007)
Q (193): I plugged a headphone in my ASRock motherboard with Realtek HD Audio, and set the "Audio I/O" from "2CH" to "Headphone" in Realtek Audio Manager (picture1).

But the Realtek Audio Manager always recognized my headphone as 2CH speaker after I restarted the operating system (picture2).

What should I do?(1/16/2007)
Q (192): I would like to use the analog CD-in function in Windows® Vista™. But the "Analog" item of Playback and Rip can not be selected in Windows® Vista™. It was gray. Why? (Here is the screenshot.)
(1/16/2007)
Q (188): I am using an AMD® AM2 rev.G CPU on AM2V890-VSTA/ ALiveSATA2-GLAN. I have enabled the "Cool'n'Quiet" in BIOS setup, installed the "K8 CPU driver" from support CD and chosen the "Minimal Power Management" in OS, but the Cool'n'Quiet function still does not work. What can I do?(12/19/2006)
Q (190): I connected ALiveNF6G-DVI with DVI card to a DVI monitor. When system resumed from standby mode under Windows® Vista™, I got black screen on the monitor. How can I solve this?(12/19/2006)
Q (13): I am using the AMD® AM2 rev.G CPU. But the system always stops at POST after I turn on the system. I can't go into the operating system. What should I do?(12/19/2006)
Q (189): I have AM2NF6G-VSTA/ALiveNF6G-DVI motherboard. The onboard LAN does not work properly under Windows® Vista™. How can I solve this?(12/19/2006)
Q (187): I have 939Dual-SATA2 / 939Dual-VSTA / 939A8X-M / K8A8X-M / K8Upgrade-1689/K8Combo-Z motherboard. When using Nvidia 7600GS/6600LE/6800GS/7800GS "AGP" card, I am not able to install the VGA card driver. How can I solve this?(11/19/2006)
Q (185): During the POST, there is a number "0075" or "0078" showed at the right corner of the screen, and the system stop for a long time. What can I do?(10/20/2006)
Q (186): My power supply has two 4-pin (2X2) power connectors. Which one should I connect to the motherboard?(10/20/2006)
Q (182): I'm using the Core 2 Duo E6XXX CPU and DDRII 533/667 RAM on 775Dual-VSTA motherboard. But the system is very unstable. Sometimes it gets blue screen or fail when installing the Windows® XP or some applications. How do I fix this problem?(9/19/2006)
Q (184): I'm using SATA devices (Hard Drives or Optical Drives) on AM2XLI-eSATA2 (939SLI-eSATA2/939SLI32-eSATA2), but my system takes long time to boot. How do I solve it?(9/19/2006)
Q (183): My system is based on 775Dual-VSTA / ALiveSATA2-GLAN / AM2V890-VSTA with Windows® XP / Windows® 2000 operating system. After updating to the latest BIOS, I found two issues.
1.I can't find the "HD Audio Driver and Application" link in the menu of support CD.
2.There is a yellow exclamation mark in Device Manager.
What could I do?(9/19/2006)
Q (181): What key should I press to enter into BIOS setup? What key should I press to enter into boot menu?(8/18/2006)
Q (180): When I use Maxtor Diamond Max 17 SATAII HDD to install Windows® XP on 775i65GV / 775i65G / P4i65G / ConRoe865PE / ConRoe865GV, the first screen of Windows® XP installation takes long time and system hang up at partition HDD stage. What could I do?(8/18/2006)
Q (179): My motherboard is AM2XLI-eSATA2. How do I install Windows® XP on SATA HDD in AHCI mode?(8/18/2006)
Q (178): My motherboard is ConRoeXFire-eSATA2. When booting from support CD to make SATA floppy image driver disk, it stop with a message. What should I do?(7/21/2006)
Q (177): I'm using a SATA HDD. My computer was running fine. But one day I turn on my computer, it keeps restarting itself after Windows® Logo page (at startup). Do you have any idea what possibility causes this?(7/21/2006)
Q (176): I use 775VM800/P4VM800/K7S41GX/K7S41 motherboards. Do these models support 1440x900 resolution?(7/21/2006)
Q (175): How do I use 4 SATA HDDs to build system in RAID0 mode on K8SLI-eSATA2, 939SLI-eSATA2 and 939SLI32-eSATA2?(5/24/2006)
Q (174): If I use Conroe 1066-CPU on 775Dual-VSTA. What kind of memory should I use?(5/24/2006)
Q (171): I am using Geode NX CPU on ASRock K7S41 / K7S41GX / K7VT4A Pro / K7VT6-C / K7Upgrade-600 series motherboard.
How do I set FSB jumper for my CPU?(4/21/2006)
Q (170): When I use DDR 400 (200 MHz) memory on my board, it shows that the DRAM frequency is running at DDR 333 (166MHz) in BIOS main page. The BIOS option "DRAM Frequency" is set at default setting "Auto". Why?(4/21/2006)
Q (172): My onboard audio is AC'97 audio. The front panel audio connector cables of my case are different from the description of manual. How should I connect them? Please advice.(4/21/2006)
Q (173): How do I enable Intel® Matrix Storage Manager on 775XFire-eSATA2 and 775XFire-RAID?(4/21/2006)
Q (168): My motherboard is 775XFire-RAID, its SATA controller is in Intel® ICH6R. But when I install windows 2000/XP and press F6 to load the SATA driver diskette, I cannot see the items for ICH6R. What should I do?(3/20/2006)
Q (167): I installed a SATA hard disk and a CD/DVD drive on 775Twins-HDTV/P4Twins-HDTV, connected the hard disk to SATA1 connector and the CD/DVD to IDE1. Enabled "ATA Combination Mode" in BIOS settings. But the motherboard could not detect the CD/DVD drive. Why?(3/20/2006)
Q (169): I am installing the Windows® 98SE on my P4i65GV/ 775i65GV motherboard. After I installed the "Intel® VGA Drivers" from the support CD and restarted the system, the system shows that it cannot find the "ikch8xx.cat" and "isb8xx.cat" files. What should I do?(3/20/2006)
Q (166): What's the requirement for High Definition Audio to work under Windows® XP 64bit?(2/17/2006)
Q (165): I have installed total 4GB memory on my motherboard. However, it can only recognize around 3GB or less. How should I do to recognize 4GB totally?(2/17/2006)
Q (164): If I use AC'97 front audio panel with, how do I connect to the High Definition Audio header on the motherboard and get front audio work?(2/17/2006)
Q (163): I use two SATA HDDs to create RAID 1 (mirroring) array on K8NF4G-SATA2. After I finish setting up the array and OS installation, I remove one of the two SATA HDDs. However, when I put the SATA HDD back, it shows a warning message as below when booting up the system. What should I do?
(1/16/2006)
Q (162): I use a Samsung HD080HJ (P80SD) 80GB SATA II HDD on K8Upgrade-NF3. After installing Nvidia all in one driver from the support CD, it takes a little bit long time to boot into Windows® XP. How could I solve this problem?(1/16/2006)
Q (161): After installing Windows® XP x64 Edition, I see an "Unsupported Standard Game Port" in device manager. And there is no exclamation mark or error message. Why?(1/16/2006)
Q (159): When I use an Athlon 64 X2 Dual Core CPU on 939A8X-M / K8COMBO-Z / K8Upgrade-1689, the AGP display card does not run at AGP mode. How should I fix this problem?(12/19/2005)
Q (158): I installed Windows XP x64 Edition on a system which is built by an Intel EM64T CPU and 4 GB memory on 775i915P-SATA2 / 775i65PE / 775V88+ / 775V88. Windows reports system memory about 3.0 - 3.5 GB. Why?(12/19/2005)
Q (157): I installed a Windows XP operating system for 775Twins-HDTV in my SATA HDD. I want to duplicate my SATA HDD to another new SATA HDD by using GHOST program. After finished, the new duplicated SATA HDD cannot boot up. What should I do?(11/18/2005)
Q (156): I am a K8NF4G-SATA2 / 939NF4G-SATA2 user. Is it possible that I can adjust the onboard VGA shared memory to 256MB?(11/18/2005)
Q (155): When I play media files with SATA hard disk on 939A8X-M / K8A8X-M / K8Upgrade-1689 / K8COMBO-Z, the screen lags and the sound also becomes abnormal. How should I fix this problem?(11/18/2005)
Q (154): I would like to use RAID functions with K8NF4G-SATA2 motherboard. When I adjust the "RAID Mode" option as "Stripe Mirroring" or "RAID 5" (picture A, B) in MediaShield Utility, the system appeared an error message "Invalid number of disks selected" (picture C, D). Why?

picture A, B.


picture C, D.
(10/17/2005)
Q (152): How do I use "Boot from Network" function on ASRock motherboard?(10/17/2005)
Q (151): I use an AMD Sempron 2500+ 64bit CPU with K8Upgrade NF3/ K8 Combo-Z/ K8Upgrade-VM800/ K8Upgrade-PCIE/ K8Upgrade-1689/ K8A8X-M motherboard. According to the specification of the boards, it supports CPU Vcore adjustment and CPU multiplier setting functions. However, the "Processor Voltage" and "Processor Multiplier" options are showed as gray in BIOS, I can't change it. Why?(9/20/2005)
Q (150): My 775Dual-880Pro motherboard has DDR and DDRII memory slots. Can I use DDR and DDRII memories with this motherboard at the same time?(9/20/2005)
Q (149): My motherboard is P4VM800/ 775VM800/ P4V88+/ 775V88+/ P4Dual-880Pro/ 775Dual-880Pro/ K8Upgrade-VM800. I used it with SATA hard drive with RAID condition under Windows XP. If I log on with a limited user account, the system will show an error (see below picture), what should I do?
(8/24/2005)
Q (148): I am using P4Dual-915GL/ 775Dual-915GL. After updating the VGA driver from 6.14.10.3943 to 6.14.10.4299, the maximum memory allocated for graphics became 192MB. Why?(8/24/2005)
Q (147): I use PCI Express VGA card on my ASRock motherboard. My operation system is Windows 98SE / ME. In "Device Manager", there are two "Display Adapter Controllers" in "Display Adapters" option. What should I do?(7/15/2005)
Q (146): I would like to install Red Hat Linux 9.0 on my VIA 8237/8237R based motherboards. But after I finished the installation of Red Hat Linux 9.0, it hung with kernel panic during boot-up. The error message is shown as below:

How do I fix this problem?(7/15/2005)
Q (145): My SATA HD is WD 800JD. But the HDD cannot be detected by VIA 8237/8237R based motherboards. How do I solve it?(7/15/2005)
Q (144): I am using AMD FSB 200Mhz CPU on K7VT4A PRO, I cannot set my DDR333/ DDR400 memory to DDR333/ DDR400 under BIOS setting. Why?(6/23/2005)
Q (143): I have a P4i65PE motherboard. The SPEC of P4i65PE supports "Bypass Access Technology (BAT)" on ASRock website. How do I get this function to work?(6/23/2005)
Q (142): I used Sempron 2600+/2800+ CPU with K8Upgrade-760GX / K8Combo-Z. The specification of the boards can support CPU Vcore adjustment and CPU multiplier setting functions. But in the BIOS setting, this option is showed as gray and can not change the setting. Why?(6/23/2005)
Q (141): I would like to use a big capacity Hard Disk on ASRock motherboard. I wonder how large of capacity can ASRock motherboard support at most?(6/23/2005)
Q (138): My Windows® 98SE / ME system is built by K8 Combo-Z / 939A8X-M / K8Upgrade-1689 / K8A8X-M. I found the latest released BIOS which was added a new option-SATA Operation Mode. Can I use the BIOS for my system?(5/15/2005)
Q (140): I am a K8Upgrade-VM800 / P4VM8 / 775VM8 / P4V88+ / 775V88+ user. I found that a new option "SATA Operation Mode" was added in the latest production BIOS. What is the option for? How should I set it?(5/15/2005)
Q (139): I am going to use K8 Combo-Z / 939A8X-M / K8Upgrade-1689 / K8A8X-M to build up my system. I found that there is a new option "SATA Operation Mode" was added in the latest production BIOS. What is the option for? How should I set it?(5/15/2005)
Q (137): I use a PCI VGA card with onboard VGA of K8Upgrad-VM800 for dual monitors under Windows XP. After updating to Service Pack 2, the function of dual monitors does not work. What should I do? (4/8/2005)
Q (136): When I connect my hard disk as a master device and LG CD-ROM as a slave device on the IDE channel of P4Dual-915GL/775Dual-915GL, the system can not recognize my hard disk. How should I solve the problem?(4/8/2005)
Q (135): According to the specification of P4Dual-915GL/775Dual-915GL on ASRock website, it can support up to 224MB VGA shared memory. Where can I adjust the VGA shared memory size?(4/8/2005)
Q (134): My motherboard is Intel 915GL chipset based. After I installed Intel VGA driver 14.10, the screen became black when entering into Windows 2000/XP. What should I do?(4/8/2005)
Q (133): I use K8 939 pin CPU. When I install two different sizes memory, 256 MB and 512 MB on blue DIMM slots of K8Combo-Z / 939A8X-M / K8Upgrade-1689, it only recognized 512 MB for total memory size. Why?(3/21/2005)
Q (132): I use a HT CPU and an ASRock motherboard which supports Hyper-Threading. How do I know if my system is working under Hyper-Threading?(3/21/2005)
Q (131): When I use a Maxtor 250GB hard drive on my ASRock motherboards, the operating system Windows® 2000 or XP only recognizes 128 GB or 137GB. How should I fix this problem?(3/21/2005)
Q (130): I want to install onboard audio driver on my P4i45GV. However, when I executed the "Autorun" program of the support CD, I couldn't find the C-Media audio driver item in the menu. What should I do?(3/21/2005)
Q (126): I am a P4i48 user. After I installed Intel INF driver and restarted the system, it could not enter into OS. Why?(2/18/2005)
Q (129): When I plug a PCI graphics card on P4VM8, it is not able to run dual monitors with onboard VGA under Windows XP. How do I solve it?(2/18/2005)
Q (128): When I run the PC game, "The Lord of the Rings-The return of the king", on ASRock P4Dual-915GL based system, it would show an error message "Could not find with the required capabilities...". What should I do?(2/18/2005)
Q (127): My motherboard is P4Dual-915GL. In the manual, it said the AGI Express slot is PCI Express x4. Can I use other PCI Express x1/x2/x4 devices, like PCI Express LAN card or RAID card, on AGI Express slot?(2/18/2005)
Q (122): My hard drives are Maxtor Diamond MAX 10 and MaxLine III SATA 250 GB and 300 GB with 16 MB cache buffer. My hard drives can not be detected correctly during the POST, what can I do?(1/18/2005)
Q (123): If I use a SATA HDD and an IDE HDD together on P4i65GV, how do I boot from SATA HDD?(1/18/2005)
Q (125): I want to install Linux Red Hat 9.0 with HT CPU on my P4i65GV. After installation completed and entered into OS, there are two kinds of OS for choosing: 2.4.20-8smp, and 2.4.20-8. When entering into OS 2.4.20-8smp and selecting shut down, it will not shut down properly. How should I solve the problem?(1/18/2005)
Q (124): If I use only one 128MB memory on the ASRock board with integrated VGA (ex. K7VM3, K7S41/GX, etc...), what share memory size should I choose?(1/18/2005)
Q (121): I used Prescott CPU and P4i45GV/P4i65GV. I wanted to use NT4.0, but the installation can not be completed. What should I do?(12/15/2004)
Q (120): My CPU is Duron FSB 200 MHz CPU. Why my DDR 400 SDRAM can only run at DDR 266 speed on the K7VT6 motherboard?(12/15/2004)
Q (119): My motherboards are K7VT4A+ and K7VM3. During the POST, it shows "Mac address are invalid in both CMOS and DMI. Press F1 to resume". What should I do?(12/15/2004)
Q (118): My OS is Windows XP (or Windows 2000), and I have installed XP Service Pack 1 (Windows 2000 Service Pack 4). But when I use USB 2.0 devices, it will show "High-Speed devices is attached to a non-Hi-Speed port". How can I use USB 2.0 devices?(10/15/2004)
Q (117): I'm using K7VT4A+. From the specification on the website, this model supports FSB 333 MHz CPU. However, I found a FSB 400 MHz FSB jumper setting on the PCB of the motherboard. Can this motherboard support FSB 400 MHz CPU?(10/15/2004)
Q (116): When I install Windows XP with SATA HDD on K8 Combo-Z, I found driver logo warning messages during installation. What should I do?(10/15/2004)
Q (115): My motherboard is K7S41(GX), what should I set in the BIOS setup to use the on-board VGA with a PCI VGA card for dual monitors function?(10/15/2004)
Q (112): My ASRock motherboard supports Hybrid Booster. Is Hybrid Booster a utility to install? Where can I get it?(9/14/2004)
Q (114): After updating Windows XP to service pack 2, some benchmark or programs may not work properly. What's going on?(9/14/2004)
Q (111): I use 3.2G/3.4GHz CPU on P4i65GV / P4i48 / 775i65GV. But CPU speed shows 2.8G? How do I fix it?(9/14/2004)
Q (109): My motherboard is K7S8X. I can't format my Samsung hard drive and install OS. What should I do?(8/16/2004)
Q (108): My motherboard is GE PRO-M2. After installing MR modem driver, there is an exclamation mark on modem device under device manager. How do I solve it?(8/16/2004)
Q (107): The FSB jumper setting table of K7VT4A+ on the PCB silk screen on the board is different from the description in the installation guide. Which is correct?(8/16/2004)
Q (106): Does my ASRock K7 motherboard, which supports Athlon XP FSB 333 MHz CPU, support AMD® Sempron CPU?(8/16/2004)
Q (110): My motherboard is SiS chipset based motherboard and the driver of AGP PCI to PCI is version 1.16a or 1.13.03 installed. After updating the Windows XP to service pack 2, there is an exclamation mark in AGP driver of device manager. What should I do?(8/16/2004)
Q (104): My motherboard is K7S8X. When I connect my HDD on primary IDE with jumper setting at master and AOpen DVD\CD-RW combo drive on primary IDE with jumper setting at slave, it takes more than 1 minute to login Windows XP. How can I solve this problem?(7/12/2004)
Q (103): Sometimes when my P4i65GV boots up, the CPU fan starts to work then shut down right away. After waiting for 1~2 seconds, it starts to work again. Why?(7/12/2004)
Q (105): I have an ASRock INTEL ICH5 south bridge based motherboard (P4i65GV, P4i48..). In BIOS setup---IDE Configuration---Onboard IDE Operate Mode, there are two options "Enhanced Mode" and "Compatible Mode". Which one should I select? What is the difference between them?(7/12/2004)
Q (101): There is an annoying noise when I was playing music on my P4AL-800(M) system. Is there any way to improve it?(6/11/2004)
Q (100): I have an Intel ICH5 chipset based motherboard. I found that my SATA hard drive is not recognized under Linux. What should I do?(6/11/2004)
Q (99): I have installed 1 SATA HDD and 1 IDE HDD (or SCSI card with SCSI HDD) on my P4i48 motherboard, how can I select IDE HDD (or SCSI HDD) in the Boot Device Priority?(6/11/2004)
Q (102): Why is my 4GB of memory reported as about 3.5GB by the system if the chipset of the motherboard support to 4GB Memory size?(6/11/2004)
Q (95): How do I enable the Athlon 64 Processor's "Cool'n Quiet" throttling functionality on K8S8X?(5/15/2004)
Q (96): My hard drive is 160 GB, when I install Windows 2000 or Windows XP, I can only see 137 GB. However, when I install this 160 GB hard drive on the ATA 133 RAID card, I can use whole 160 GB. What's wrong?(5/15/2004)
Q (98): My motherboard is P4i45D+ and I used FSB 800 CPU with ASUS V9520MAGIC/T/64 (or PIXELVIEW GF4-TI4200-8X-NVG28A/64M) VGA card. When I play 3D games, the appearance is lag. Why?(5/15/2004)
Q (97): I'm using INTEL Prescott CPU on ASRock motherboard. After the system works for a while, I realize that the sound of the CPU fan is getting louder. What's wrong?(5/15/2004)
Q (94): How do I install AMD Athlon(tm) 64 Processor Driver under Windows XP on K8S8X?(5/15/2004)
Q (93): My ASRock motherboard can support Prescott CPU. If I want to use Prescott CPU, is there anything I need to notice?(4/15/2004)
Q (92): When I try to install Intel IAA driver for my P4i65GV or P4i48, it stops and shows the error message "Incompatible hardware. The install package is only compatible with Intel 800-series or compatible chipsets. Install will now exit." Why?(4/15/2004)
Q (91): I bought a new large size (80GB) HDD. After I installed it to my ASRock M/B, the BIOS only recognized it as a 32GB HDD. How can I get the full capacity of the HDD?(4/15/2004)
Q (90): My motherboard is K7S41 or K7S41GX, my Hauppauge Win TV card can not work with it. What should I do?(4/15/2004)
Q (89): My on-board LAN is not working, I found that the MAC address of my on-board LAN is 00-00-00-00-00-00 or FF-FF-FF-FF-FF-FF. What's wrong?(4/15/2004)
Q (88): My motherboard is P4S61. If I connect the hard drive and non-UDMA CD-ROM on the same IDE channel, I can not install Windows® XP. What can I do?(3/15/2004)
Q (85): When I try to create the SATA driver floppy diskette for my K7S8XE+ / P4S55FX+, the free DOS program seems stop with unknown reason. What should I do now?(3/15/2004)
Q (87): When connecting the POWER SW, POWER LED, RESET SW and HDD LED cables from my chassis to the PANEL1 connector on the motherboard, I found that the pin holes of the cable does not match with the connector. What should I do?(3/15/2004)
Q (86): My motherboard is Intel or ALi south bridge based motherboard. When I connect the ATX power connector to the motherboard, the system power on right away. Why?(3/15/2004)
Q (84): My motherboard is K7S8XE, what is the function of USB 2.0 controller option in the BIOS setup?(2/17/2004)
Q (83): When I play some video or audio media files through my IDE optical devices (CD-ROM and DVD-ROM). I feel that the video/audio playback is not smooth. What should I do?(2/17/2004)
Q (79): My motherboard is K7S8XE+. There are error messages appeared when I am making the SATA driver diskette. What should I do?(1/14/2004)
Q (78): In GE Pro-M2 latest BIOS advanced menu, there is one option named "Flexibility". What's the function?(1/14/2004)
Q (82): How do I install the display driver for P4S61?(1/14/2004)
Q (81): I'd just finished setting up my system. When booting it up, I found that the LED of the floppy drive is always on and I cannot read any floppy disk with the floppy drive. Why?(1/14/2004)
Q (80): My motherboard is K7S8X R 3.0. How much Vcore voltage would be increased if I enable "Over Vcore Voltage" in the BIOS setup?(1/14/2004)
Q (77): I want to use the hot plug feature with my SATA HDD. What requirements do I need to know?(12/12/2003)
Q (76): When I install Windows XP with SATA HDD on K7S8XE+, I found driver logo warning messages during installation. What should I do?(12/12/2003)
Q (75): My parallel port printer can't work normally with my ASRock motherboard. What should I do now?(12/12/2003)
Q (74): I'm using an add-on LAN card on my ASRock motherboard. The LAN card provides a "Wake On LAN" connector with a cable. Is there a connector on the motherboard so that I can plug this cable?(12/12/2003)
Q (73): I have an ASRock ATX motherboard. Do I need to screw on the double hole?(12/12/2003)
Q (67): I'm using Intel chipset based motherboard. After installing Win98SE and all drivers, the data transfer rate from IDE devices (HDD or CDROM) seems not fast enough. Is there any thing I can do?(11/14/2003)
Q (66): I'm using Duron 1600MHz Applebred CPU on your K7 series motherboard. How come the CPU is only recognized as a Duron 1200MHz CPU?(11/14/2003)
Q (68): My motherboard is SiS chipset based K7S8XE, why my USB 2.0 hard disk box can not be recognized under Windows XP?(11/14/2003)
Q (70): When I try to create my K7S8XE+ SATA driver diskette and boot up with the driver CD, the system locks up. What should I do now?(11/14/2003)
Q (71): With 3Com /Intel Gigabit LAN card installed, my system cannot connect to the Internet if PC-cillin 2002 personal firewall is enabled. How do I solve it?(11/14/2003)
Q (72): Are there any requirements if I use AMD FSB 333/400 CPU on K7S8X(E) series boards?(11/14/2003)
Q (69): In the beginning of P4VT8 SATA driver diskette creating process, my USB keyboard seems doesn't work. What should I do?(11/14/2003)
Q (61): Do ASRock K7 motherboards support the latest Applebred Duron CPU with FSB266 MHz, such as 1400MHz, 1600MHz, and 1800MHz?(10/15/2003)
Q (64): I'm using Intel FSB 400 MHz CPU, why does my DDR 333 SDRAM only run DDR 266 on P4i45GV?(10/15/2003)
Q (63): When I was installing the Windows 98SE on K7VT4-4X motherboard, the H/W info error message appeared while last 3 minutes of installation, what should I do?(10/15/2003)
Q (62): I'm using an ASRock motherboard which supports Hyper-Threading technology. How come there is no Hyper-Threading technology option in BIOS setup?(10/15/2003)
Q (65): I'm using ALi chipset based motherboard, P4AL-8X and P4AL-800. How can I install Linux correctly on them?(10/15/2003)
Q (57): My ASRock motherboard provides a 1.5V AGP slot. How do I know if I can use my AGP card on the motherboard?(9/15/2003)
Q (58): When I run the "GHOST" program on my K7S8X, the speed of "GHOST" seems slower than others. How could I improve it?(9/15/2003)
Q (60): Can I use on-board VGA and add-on AGP card for dual monitors?(9/15/2003)
Q (59): I'm using an AGP 8X card to replace the old AGP 4X card on P4VX4. In the BIOS, I can see AGP mode icon when the AGP 4X card is installed. But there is no AGP mode option when AGP 8X card is installed. Why?(9/15/2003)
Q (52): What is Boot Failure Guard (B.F.G)? How do I enable this function?(8/15/2003)
Q (50): I have SiS chipset based motherboard (ex. GE Pro-HT) and ATI ALL-IN-WONDER 9000 Pro AGP card. How can I capture the video correctly?(8/15/2003)
Q (51): The north bridge of my VIA chipset based motherboard M266A is hot, is it normal?(8/15/2003)
Q (54): My motherboard provides FID jumpers. Why I can't change my CPU multiplier even though I already adjust FID jumpers correctly?(8/15/2003)
Q (56): After I shut down the system, my USB mouse is still light on. Why?(8/15/2003)
Q (55): I'm using Intel FSB 400 MHz CPU, why does my DDR 333 only run DDR 266 on P4i45PE?(8/15/2003)
Q (53): Are there any restrictions for the different color of DDR DIMM slots on P4VX4??(8/15/2003)
Q (49): Can I install 4 DIMM of DDR SDRAM with P4 FSB 533 MHz CPU on P4VX4 motherboard?(7/9/2003)
Q (48): When I'm going to install USB 2.0 driver for my Windows 2000, it asked me to update Service pack 4. Where can I get Service pack 4 for Windows 2000?(7/9/2003)
Q (47): I'm using P4i45PE now. How do I run FSB 800 MHz correctly?(7/9/2003)
Q (46): How could I use Wake on LAN function?(7/9/2003)
Q (45): I'm using ASRock motherboard. In the BIOS, I found that the Vcore is a little bit higher. Is this normal?(7/9/2003)
Q (44): When I manually increase CPU host frequency in the BIOS on K7S8X(E), will AGP and PCI speed up at the same time?(7/9/2003)
Q (41): I found two digits or letters changing at the right bottom corner during POST screen. What is it?(6/13/2003)
Q (38): How do I get the correct CPU speed after updating the BIOS?(6/13/2003)
Q (40): How do I get more VGA memory size for Intel Extreme Graphics of the P4i45G(L)?(6/13/2003)
Q (42): May I use the power supply without +12V power (4 pins) connector for ASRock Intel platform Motherboards? (6/13/2003)
Q (43): How to clear CMOS? (6/13/2003)
Q (39): When I use ASRock P4i45G(L) M/B, I see there is 1MB shared memory from the system memory shown in the POST screen during boot process. What is the 1MB shared memory used for? (6/13/2003)
Q (37): What's the function of JL1 and JR1 jumpers on my ASRock motherboard?(5/9/2003)
Q (36): If I install Win9x MR driver by pressing the auto setup of the support CD, the MR modem always picks up com 5. How do I solve it?(5/9/2003)
Q (35): How can I run a FSB800 CPU on P4i45G correctly?(5/9/2003)
Q (34): Can I use the microphone if I select 6 speakers in C-Media Audio Configuration?(5/9/2003)
Q (33): How do I select "Output Type" in C-Media 3D Audio Configuration?(5/9/2003)
Q (32): Is there any suggestion of CPU and memory for K7S8X motherboard?(5/9/2003)
Q (31): Can I use DDR 333 SDRAM on K7VT2?(5/9/2003)
Q (27): Does ASRock motherboard support "Boot from USB device", if my USB device is bootable?(4/15/2003)
Q (26): Where do I get the SiS IDE driver for my Win98SE on K7S8X?(4/15/2003)
Q (29): K7S8X supports AGP 8X, but why can't I adjust to AGP 8X mode in BIOS?(4/15/2003)
Q (30): I'm using a AMD Athlon XP 2000+ processor with FSB 266MHz on K7S8X, but the FSB jumper can only set from 100, 133, 166MHz. How do I adjust to FSB 266MHz?(4/15/2003)
Q (28): Does ASRock AMD series motherboard support AMD FSB 333Mhz CPU?(4/15/2003)
Q (25): Sometimes I cannot boot up from my floppy disk, Why?(4/15/2003)
Q (24): Do I need to install USB2.0 driver if my system runs Win XP SP1?(3/3/2003)
Q (23): Where can I get the detailed BIOS setting description?(3/3/2003)
Q (22): Does the integrate VGA of G Pro support DirectX 9.0 under Win XP?(3/3/2003)
Q (21): Why I only see 1667MHz for my Athlon XP 2000+ CPU?(3/3/2003)
Q (20): After I updated BIOS, ASRock LOGO disappeared when booting up. Why?(3/3/2003)
Q (19): What is ASRock U-COP?(3/3/2003)
Q (15): When I want to install an add-on AGP graphics card, do I need to adjust any settings in the BIOS if my motherboard has Onboard VGA?(1/30/2003)
Q (18): Where can I find Linux driver for K7VM2 and K7VT2?(1/30/2003)
Q (17): Should I clear the CMOS after I upgrade the BIOS?(1/30/2003)
Q (16): How can I set CPU FSB (Front Side Bus) correctly?(1/30/2003)
Q (12): Why I only saw 224MB memory installed in my K7VM2 system? (12/25/2002)
Q (14): If I want to use add-on AGP card on G Pro, do I need to change anything in the BIOS utility?(12/25/2002)
Q (11): I have a TV card installed in K7VT2 and K7VM2. What should I adjust the setting to watch TV properly?(11/26/2002)
Q (10): If I want to use 4/6 speakers, how do I setup 4/6-Channel audio ?(11/26/2002)
Q (9): How do I install USB 2.0 driver under Windows XP for K7VT2?(11/26/2002)
Q (8): How do I install the LAN driver for K7VT2?(11/26/2002)
Q (7): My PC runs Windows 98/ME, can I still use USB 2.0 products?(11/26/2002)
Q (6): Does Intel 845 series (P4i45D / P4i45E / P4i45GL / P4i45GV / P4i45PE / P4i45G / 775i45GV) chipset support 3.3V AGP card?(10/29/2002)
Q (5): I have a drive that is larger than 137 GB but the operating system only recognizes 128 GB or 137 GB. How can I fix this?(10/29/2002)
Q (4): If I use 1 GB or more memory on the M/B, Windows 98/ME O.S. shows "Error Message: Insufficient Memory to Initialize Windows". What's wrong?(10/29/2002)
Q (3): Can I install both DDR and SD RAM at the same time?(10/29/2002)
Q (2): What's the meaning of AMI BIOS Beep Codes?(10/29/2002)
Q (1): Why can't I boot up my system with one hard drive on primary IDE and an optical device (CD-ROM, DVD-ROM, CD-RW, etc...) on secondary IDE If connecting the hard drive/optical device as the secondary drive?(10/29/2002)
Show more